With Touch ESP32-S3 7 inch Display Development Board Type B - 1024×600 Touch LCD, WiFi & Bluetooth, LX7 Dual-Core 240MHz

Product details

ESP32-S3 7inch Display Development Board, ESP32 With Display, 800×480, Options For Touch Function, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna ESP32-S3 7″ LCD Development Board Integrates RGB interface LCD and 5-point capacitive touch Version Options ESP32-S3-LCD-7 without touch control ESP32-S3-Touch-LCD-7 with touch control Features This product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 7inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 16MB Flash Onboard 7inch LCD display, 800×480 resolution, 65K color Supports 5-point capacitive touch control via I2C interface, with interrupt support (for touch version only) Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios Application Scenarios IPS Display Panel Excellent display performance, 170° viewing angle Supports multiple peripherals Supports the expansion of multiple peripherals via Sensor, CAN, RS485, and I2C interfaces Application Example for reference only, please refer to the Package Content for the detailed part list What's On Board ESP32-S3N16R8 The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash 7inch display panel connector Touch panel connector TF card slot USB Type-C port UART1 Port USB TO UART Type-C port UART2 connector UART1 and UART2 are the same UART, selected by switch Sensor header CAN header I2C header RS485 header 3.7V single lithium battery PH2.0 header CAN terminal resistor selection RS485 terminal resistor selection UART selection select UART1 or UART2 BOOT button Press and hold while powering on for program burning RESET button I2C level selection 3.3V / 5V DONE Lithium battery charging completed indicator CHG Lithium battery charging indicator PWR Power supply indicator out...

Contact IBBS to confirm current availability, exact model, and pricing.