On Demand HANTEK DSO4204C Digital Oscilloscope And Function Generator
Hantek DSO4204C 200MHz 4CH Digital Oscilloscope and Function Generator The Hantek DSO4204C is an easy-to-use digital oscilloscope with 200 MHZ bandwidth, a minimum range of 500 μV /div, 1GS/s sample rate. The DSO4204C Hantek Digital Oscope also...
Product details
Hantek DSO4204C 200MHz 4CH Digital Oscilloscope and Function Generator The Hantek DSO4204C is an easy-to-use digital oscilloscope with 200 MHZ bandwidth, a minimum range of 500 μV /div, 1GS/s sample rate. The DSO4204C Hantek Digital Oscope also comes equipped with a function generator that goes up to 25 MHz. Hantek DSO4204C Features: 4 Channel Oscilloscope with an external trigger, digital volt meter, and auto-ranging 1 channel function generator. Over 32 auto-measurement functions. Over 14 types of trigger functions, including an edge, overtime, pulse, pattern, and interval. Decode Type: I2C, SPI, UART, LIN, CAN. Supports a variety of SCPI remote control commands USB storage and remote interface Options not included (even though custom orders possible) include: RS232, LAN ,HDMI, WIFI, Touch Screen, SD storage Item Includes: 4 Oscilloscope probes (200 MHz 1x, 10x attenuation, 1MΩ), Installation CD, USB A-B cable, BNC to BNC cable, Power Cord Hantek DSO4204C Specifications: Bandwidth: 200MHz Rise Time (BNC, typical):≤1.8ns Sample Rate Range:1GS/s Channel: 4 Channel+EXT Input Coupling: DC,AC or GND Input Impedance: 1MΩ±2%,20pF±3 pF Probe Attenuation: 1X,10X Supported Probe Attenuation Factors: 1X,10X,100X,1000X Overvoltage Category: 300V CAT II Maximum Input Voltage: 300VRMS (10X) Waveform Interpolation: (sin x)/x Record Length:Max. 64K samples per single-channel; Max. 32K samples per dual-channel (4K, 32K optional) Horizontal Scale (s/div): 2ns/div~100s/div, 1~2~5 sequence Sample Rate and Delay Time Accuracy: ±50ppm Delta Time Measurement Accuracy (Full Bandwidth): Single-shot, Normal mode: ±(1 sample interval+100ppm*reading+0.6ns) >16 averages:±(1 sample interval+100ppm*reading + 0.4ns) Sample interval = s/div ÷ 200 AD Converter: 8-bit resolution,each channel sampled simultaneously Vertical Scale (Probe 1X): 500μV/div~10V/div at input BNC Position Range: 500μV/div~20mV/div, ±400mV; 50mV/div~200mV/div, ±2V; 500mV/div~2V/div, ±40V; 5V/div~10V/div, ±50V Selectable Analog Bandwidth Limit: 20MHz (typical) Low Frequency Response (-3db): ≤10Hz at BNC DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 500μV/div Acquisition Modes:Normal, Peak Detect, Average and HR Acquisition Rate (typical): Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement) T...
Contact IBBS to confirm current availability, exact model, and pricing.